Arduino – Datalogger with Temperature Sensor and Photoresistor

In this project He is going to create a simple Datalogger with my Arduino and an Ethernet shield.

With this concept you can change his code and monitor any sensor you desire.

He’ll be using a photoresistor and a temperature sensor and all the information will be stored in a micro SD card.

Note: I apologize for my voice. I’m a bit sick so my voice sounded a bit different than usual.

Parts Required

• 1x Arduino Uno
• 1x Ethernet Shield
• 1x Micro SD Card
• 1x Temperature Sensor (I’m using the LM335Z)
• 1x Photoresistor
• 1x 1k ohm Resistor
• 1x 4700 ohm Resistor
• 1x Breadboard (or  two)
• Jumper Cables

Go to original post

(written by Rui Santos)