Garage Door Opener with iphone (Arduino project)

This project lets you can open and close the garage with the iPhone.

It used the Arduino, Ethernet Shield,  relay and iPhone app.

And, it includes hardware configuration, the source code (sketch), and app usage.

The hardware requirements to start is:
1) Arduino UNO with USB cable
2) Ethernet Shield Arduino
3) Relay (for arduino 5 V)
4) Router Belkin (we recommend N150 or N300), also TPLink models( we recommend TL-WR740N). See TPLink model configutarion:http://iwup.altervista.org/shop/tplinkconfiguration.pdf
5) Arduino Case (optional, not necessary)

The software requirements to start is:
1) Arduino v0022 IDE you can download here:http://arduino.googlecode.com/files/arduino-0022.dmg
2) Open Your Garage project firmware, called “openyourgarage_arduino.pde”, you can download here:http://iwup.altervista.org/shop/openyourgarage_arduino.pde.zip
3) Open Your Garage vPRO iOS App.

Go to original post.