Build up a iPad Plarail Patrol with Arduino + OSC

    This project gives you knowledge about how to setup a OSC ready Arduino which allows you to send instruction to your Arduino wirelessly from your iOS/Android device by using TouchOSC
    471 views
    0 comments
    0 likes
    ORIGINAL POST
    By UNKNOWN
    components
    Hardware Components
    Arduino board
    X 1
    Sensor Shield
    X 1
    Wireless Module or Wireless router
    X 1
    Low power consumption servo unit
    X 1
    Wireless AP/Router
    X 1
    details

    This tutorial give you an idea to build up a Parail (Toy train & track system) controlled by a iPad,

    You need the components such as
    – Arduino board (Mega 2560, UNO),
    – Ethernet Shield
    – Sensor Shield (Optional)
    – Wireless Module or Wireless router (Optional if run with wired Arduino network)
    – Low power consumption servo unit (recommend a mini or micro sized servo)
    – Power supply, for example 7.4v recommend for wireless, lan, servos at the same time.
    – Wireless AP/Router, DHCP enabled. (For iPad)

    osc1
    Source : http://blog.mydream.com.hk/tag/osc 

    This tutorial give you an idea to build up a Parail (Toy train & track system) controlled by a iPad,

    You need the components such as
    – Arduino board (Mega 2560, UNO),
    – Ethernet Shield
    – Sensor Shield (Optional)
    – Wireless Module or Wireless router (Optional if run with wired Arduino network)
    – Low power consumption servo unit (recommend a mini or micro sized servo)
    – Power supply, for example 7.4v recommend for wireless, lan, servos at the same time.
    – Wireless AP/Router, DHCP enabled. (For iPad)

    osc1
    Source : http://blog.mydream.com.hk/tag/osc 

    COMMENTS

    Please Login to comment
      Subscribe  
    Notify of
    POSTED BY
    wiznetmuseum