Arduino Home Automation Outlet Box

This project is based on the new Ethernet Shield that maked Seeduino and used WIZnet the newest Ethernet chip W5500.
ORIGINAL POST
By ryanjblajda
components
Hardware Components
Arduino Un
X 1
Seeduino Ethernet Shield(WIZnet W5500)
X 1
cal Ammo Can
X 1
8 Relay Sainsmart Module
X 1
6 Bay Terminal Block
X 1
Amp Outlets
X 1
details

IMG_3921

This project is based on the new Ethernet Shield that maked Seeduino and used WIZnet the newest Ethernet chip W5500.

The author would put his Arduino to good use and uses it to create a webserver, and website for the Arduino to serve up which would control up to 8 outlets.

He decided to use and ammo can for durability and portability as well.

Hardware:

FVLA608I028ZN9K.MEDIUM

Arduino Uno 

– Seeduino Ethernet Shield(WIZnet W5500)

– 8 Relay Sainsmart Module

– cal Ammo Can

– 6 Bay Terminal Block

– Amp Outlets

Mount Arduino & Relay Module:
product1

 

Dremel Hole for USB and CAT5 Wires :

제목 없음

So now that its mounted, cut out a nice square hole for your wires to come out of. Then use that 1/4″ hose to line the metal so it doesn’t chafe the cables. 

 

Mount your AC power outlets & wire it all up!

product3

So mount your AC power outlets, then ferrule all your wires after making them to length and wire it up!!

 

Hook It Up And Enjoy

Source : http://www.instructables.com/id/Arduino-Home-Automation-Outlet-Box/

IMG_3921

This project is based on the new Ethernet Shield that maked Seeduino and used WIZnet the newest Ethernet chip W5500.

The author would put his Arduino to good use and uses it to create a webserver, and website for the Arduino to serve up which would control up to 8 outlets.

He decided to use and ammo can for durability and portability as well.

Hardware:

FVLA608I028ZN9K.MEDIUM

Arduino Uno 

– Seeduino Ethernet Shield(WIZnet W5500)

– 8 Relay Sainsmart Module

– cal Ammo Can

– 6 Bay Terminal Block

– Amp Outlets

Mount Arduino & Relay Module:
product1

 

Dremel Hole for USB and CAT5 Wires :

제목 없음

So now that its mounted, cut out a nice square hole for your wires to come out of. Then use that 1/4″ hose to line the metal so it doesn’t chafe the cables. 

 

Mount your AC power outlets & wire it all up!

product3

So mount your AC power outlets, then ferrule all your wires after making them to length and wire it up!!

 

Hook It Up And Enjoy

Source : http://www.instructables.com/id/Arduino-Home-Automation-Outlet-Box/

COMMENTS

Please Login to comment
  Subscribe  
Notify of