This is an OSC class library for Arduino and simple test sketching. OSCclass Arduino library ver1.0.1
1. Connect EthernetShield to Arduino.
2. Connect the iPhone to a Wi-Fi router.
3. Arduino connects with a Wi-Fi router by cable LAN.
iOSC setting
1. startup iOSC,and “Edit”/”+” select No2 set
2. No2 set
choose a new set, and do part&host setting.
3. Parts setting
Message type on off
button1 /ard/ledyel int 1 0 :info-AlternateMode “ON” =seems toggle sw
button2 /ard/ledgrn int 1 0
button3 /ard/ledred int 1 0
slider1 /ard/ledpwm int min:0 max:255
4. Host setting
tap “Default Host”.
「IP Address」Input your pc IP Address.
「Port」Input “10000”
tap 「Save」
＊The host setting is common with all parts.
5. Open iOSC_iPhone_test_Arduino_sketch.pde in ArduinoIDE. Write this to Arduino.
COMMENTS