details
1. Project Description
The author for this project made smart device to monitor his room. This interactive device will let him know if anything happens in his house. This device can send the room status to his smart phone through cloud – Thingspeak.
For more information about thingspeak, please refer to the following link; https://thingspeak.com/.
2. Parts
- Arduino UNO
- Arduino Ethernet shield
- Ultrasonic distance sensor (You can use a PIR sensor, if you want to. I don’t have one so used distance sensor)
- DHT11, temperature and relative humidity sensor
- Gas sensor (MQ-2)
- OLED display (optional)
- Servo motor (This is optional, I used this to mount the distance sensor and screen the room while rotating)
- Jumper wires
3. Steps and Source Code
- Materials required
- Hardware circuit
- Thingspeak Channel
- Arduino Sketch and Libraries
Users can find the detailed implement guideline and source code on the author’s website.
For more information, please refer to the following link; http://www.instructables.com/id/Monitor-Your-Room-From-Anywhere-in-the-World/.
Link: http://www.instructables.com/id/Monitor-Your-Room-From-Anywhere-in-the-World/
COMMENTS