Disabling the Ethernet Chip and SD Card on an Arduino Ethernet Shield

    590 views
    0 comments
    0 likes
    details

    This article shows how to resolve problems that occur when using Ethernet Shield and SD Card in Arduino. Author says below

    Problems such as intermittent hanging of an Arduino sketch can occur when using the Arduino Ethernet shield with an uninitialized SD card plugged into the SD card socket of the shield. It is always best to disable the SD card before initializing the Ethernet chip, or disable the Ethernet chip before initializing the SD card.

    For more details, please refer to the following link.

    Source : http://blog.startingelectronics.com/tag/arduino-ethernet/page/2/

    Tags : 201506, Arduino UNO, Ethernet Shield

    Author : http://startingelectronics.org/, Not yet

    This article shows how to resolve problems that occur when using Ethernet Shield and SD Card in Arduino. Author says below

    Problems such as intermittent hanging of an Arduino sketch can occur when using the Arduino Ethernet shield with an uninitialized SD card plugged into the SD card socket of the shield. It is always best to disable the SD card before initializing the Ethernet chip, or disable the Ethernet chip before initializing the SD card.

    For more details, please refer to the following link.

    Source : http://blog.startingelectronics.com/tag/arduino-ethernet/page/2/

    Tags : 201506, Arduino UNO, Ethernet Shield

    Author : http://startingelectronics.org/, Not yet

    COMMENTS

    Please Login to comment
      Subscribe  
    Notify of
    POSTED BY
    ricky