Overview :
A more sophisticated server that distributes incoming messages to all connected clients, except that you are sending the message. To use, open a terminal window, telnet to your IP address devices and type away. Any incoming text will be sent to all connected clients (including typing). In addition, you will be able to see the client entry in its series also monitor.
Required :
- Arduino Genuino
- Arduino Ethernet Shield
- SCP1000
Configuration :
The screen must be connected to a network with an Ethernet cable. You will have to change network settings in the program to match your network.
This example shows how to use the SPI communication to read data from a barometric pressure sensor SCP1000, and how then send that data to the Web using Arduino or Genuine / Ethernet Shield combined as a single web server. Using Ethernet library, the device will be able to respond to HTTP requests by responding with HTML enough of a browser to display the values of barometric pressure and temperature coming from your sensor. After completing his circuit and upload the sample code below, just check the IP address of the Ethernet shield in a browser to view this information.
Dated : September, 2016
Original : http://ingenieriainstrumentacion.blogspot.kr/2016/09/uso-de-ethrnet-con-arduino.html
COMMENTS