Overview :
How to create a tool that is used to control the traffic light LEDs using WIFI Ethernet Web Server.
Required :
– Arduino Mega + LCD 16×2
– Ethernet Shield(W5100)
– RTC and LED
Configuration :
It will make a traffic light system which delay switch is set by the server and also the time of ignition and extinguished the lights also be set via the server, so the server will show the value of the clock and delay switch is set and the server are the selection button for resetting value.
To use this tool very easy, that enter the value eg in Delay red light A10, and then click SUBMIT, after CLICK SETTING, then enter the delay value yellow light B20 to delay 20 seconds, and so on, if successful then the value will be stored in the bottom of the form, if already filled all its worth CLICK to START(MULAI), it will run as a delay that gives a chance to return to the setting mode by pressing a button could SETTING.
Dated :
May, 2016
Original & Source :
http://kursuselektronikaku.blogspot.kr/2016/05/membuat-alat-kendali-traffic-light-led.html
Author :
yanuarm@hotmail.com
COMMENTS