ProDino MKR Zero Ethernet V1

The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core and W5500 Ethernet chip.
ORIGINAL POST
By KMP Electronics
components
Hardware Components
Software Apps and online services
details

ProDino-MKR-Eth_8-without-cover.jpg

Communication


Are you developing projects for an environment where wireless connections are unavailable or would be inefficient? The ProDino MKR Zero Ethernet V1 allows you to have a wired Ethernet connection between your board and Internet. This is particularly important for projects that has to be installed in industrial environments with either electromagnetic noise or special safety requirements. It contains all futures on ProDino MKR Zero board plus Ethernet W5500 chip.

ProDino MKR Zero Ethernet V1 accent

The ProDino MKR Zero Ethernet V1 has 4 relays. The 4 Relays are a solution for driving high power loads that cannot be controlled by microcontroller’s digital IOs, due to the current and voltage limits of the controller. Each relay provides 2 pole changeover contacts (NO and NC). Relays are useful in switching on/off AC appliances like fan, light, motor or high current DC actuators like solenoid valve etc. Included four LEDs indicate the on/off state of each relay.

Getting started


You can find in the Tutorial section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics. What you can do with this board see in our Examples.

Features 


  • ATSAMD21G18 Microprocessor, 32-Bit ARM Cortex® M0+
  • W5500 Ethernet chip
  • 1 x GROVE connector
  • 4 Relays Output
  • Pluggable connectors
  • 4 Optical Isolated Inputs 
  • RS485 port 
  • Switching Regulators power supply
  • Arduino MKR GSM1400 compatible

ProDino-MKR-Eth_8-without-cover.jpg

Communication


Are you developing projects for an environment where wireless connections are unavailable or would be inefficient? The ProDino MKR Zero Ethernet V1 allows you to have a wired Ethernet connection between your board and Internet. This is particularly important for projects that has to be installed in industrial environments with either electromagnetic noise or special safety requirements. It contains all futures on ProDino MKR Zero board plus Ethernet W5500 chip.

ProDino MKR Zero Ethernet V1 accent

The ProDino MKR Zero Ethernet V1 has 4 relays. The 4 Relays are a solution for driving high power loads that cannot be controlled by microcontroller’s digital IOs, due to the current and voltage limits of the controller. Each relay provides 2 pole changeover contacts (NO and NC). Relays are useful in switching on/off AC appliances like fan, light, motor or high current DC actuators like solenoid valve etc. Included four LEDs indicate the on/off state of each relay.

Getting started


You can find in the Tutorial section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics. What you can do with this board see in our Examples.

Features 


  • ATSAMD21G18 Microprocessor, 32-Bit ARM Cortex® M0+
  • W5500 Ethernet chip
  • 1 x GROVE connector
  • 4 Relays Output
  • Pluggable connectors
  • 4 Optical Isolated Inputs 
  • RS485 port 
  • Switching Regulators power supply
  • Arduino MKR GSM1400 compatible
documents
Code
Schematics
Others

COMMENTS

Please Login to comment
  Subscribe  
Notify of