Vending Machine/Cashless Device Implementation

    uses a custom PCB with a SAM D21 MCU (same as the Arduino Zero), a WizNet Ethernet shield and a MFRC522 RFID reader.
    536 views
    0 comments
    0 likes
    ORIGINAL POST
    By NottingHack
    details

    450px-Vend_pcb2.jpg

    We now have two versions of the custom cashless device:

    1. v1 – created for the Westomatic vending machine, and uses a nanode and RDM880 based RFID module, and is build mostly on perf board.
    2. v2 – created for the BevMax45 vending machine, and is heavily based on v1, but now uses a custom PCB with a SAM D21 MCU (same as the Arduino Zero), a WizNet Ethernet shield and a MFRC522 RFID reader. There is an aim to update the first vending machine to use a v2 cashless device, but as of Dec 2018, this hasn’t been done yet.

     

    More information: https://wiki.nottinghack.org.uk/wiki/Vending_Machine/Cashless_Device_Implementation

    450px-Vend_pcb2.jpg

    We now have two versions of the custom cashless device:

    1. v1 – created for the Westomatic vending machine, and uses a nanode and RDM880 based RFID module, and is build mostly on perf board.
    2. v2 – created for the BevMax45 vending machine, and is heavily based on v1, but now uses a custom PCB with a SAM D21 MCU (same as the Arduino Zero), a WizNet Ethernet shield and a MFRC522 RFID reader. There is an aim to update the first vending machine to use a v2 cashless device, but as of Dec 2018, this hasn’t been done yet.

     

    More information: https://wiki.nottinghack.org.uk/wiki/Vending_Machine/Cashless_Device_Implementation

    documents
    Code
    github code

    COMMENTS

    Please Login to comment
      Subscribe  
    Notify of
    POSTED BY
    rena