Nano v3 Ethernet Shield-w5500 (v2)

If you want to use Arduino nano to build network connected devices is the best solution!
introduction
If you want to use Arduino nano to build network connected devices is the best solution!Wiznet w5500 TCP/IP based on Ethernet controller is shielded by Ethernet. Wiznet w5500 is a TCP/IP embedded Ethernet controller. It provides full duplex or half duplex, MAC and phy and TCP/IP stacks, 10 baset / 100 basetx Ethernet. W5500 adopts efficient spi protocol and 80 MHz clock, which can be connected with arduino nano at high speed. For low power consumption, it provides w5500 wol (wake up to LAN) and power off mode.Arduino library Ethernet. H/ethernet2.h/ethernet3.h
technical details
EthernetW5500
ShieldFor Nano
Operating temperature-40C°/+85C°
Length×Width65×17.8mm
how to use
documents
Schematics
Schematic
Others
Pinout diagram
Dimension diagram

COMMENTS

Please Login to comment
  Subscribe  
Notify of
POSTED BY
SELLER
Link Location E-mailsupport@robotdyn.com Contact number+86-756-3358590
TAGS