introduction
features
Description:W5500 Ethernet Network Modules TCP/IP 51/STM32 SPI Interface For Arduino DSupports Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
Supports 8 independent sockets simultaneously
Supports Power down mode
Supports Wake on LAN over UDP
Supports High Speed Serial Peripheral Interfac(SPI MODE 0, 3)
Internal 32Kbytes Memory for TX/RX Buffers
10BaseT/100BaseTX Ethernet PHY embedded
Supports Auto Negotiation (Full and half duplex, 10 and 100-based )
Not supports IP Fragmentation
3.3V operation with 5V I/O signal tolerance
LED outputs (Full/Half duplex, Link, Speed, Active)
48 Pin LQFP Lead-Free Package (7x7mm, 0.5mm pitch)Specifications:Chip Type: W5500 Supports both: 3.3V & 5V. Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
10BaseT/100BaseTX Ethernet PHY embedded Supports: Automatic Response (Full Duplex / Half Duplex Mode) Supports: 8 independent sockets simultaneously Internal 32Kbytes Memory for: Tx/Rx Buffers Power off Mode: Support Network Wake: Support SPI Interface: (SPI MODE 0, 3),convenient connection with MCU Size: 55mm x 28mm Color: BlueWhat will you receive: 1 x SPI to Ethernet/TCP/IP W5500 Module
how to use
COMMENTS