MRA05 – ARDUINO BASED W5200 ETHERNET SET

MRA05 - Arduino based W5200 Ethernet Set is a combination set of DFRduino UNO?R3 and W5200 Ethernet shield. Using this development set, user can create ethernet application very easily via Arduino IDE. Furthermore, with FREE USB cable and Ethernet cable, user can start to build the application with a laptop or desktop. Details for item:1. DFRduino UNO R3

• Microcontroller:ATmega328 (DIP Package)
• Operating Voltage:5V
• Input Voltage (recommended):7-12V
• Input Voltage (limits):6-20V
• Digital I/O Pins:14 (of which 6 provide PWM output)
• Analog Input Pins:6
• DC Current per I/O Pin:40 mA
• DC Current for 3.3V Pin:50 mA
• Flash Memory:32 KB of which 2KB used by bootloader
• SRAM:2 KB (ATmega328)
• EEPROM:1 KB (ATmega328)
• Clock Speed:16 MHz
• Size:75x54x15 mm
• Envionment Friendly: Rohs Compliance

 2. Ethernet Shield for Arduino - W5200

• Working voltage: 5v
• Ethernet socket
• Support Micro SD card reading / writing
• Ethernet and SD card sharing the SPI interface, only one function per i
• Standard size Arduino compatible controller, while supporting Arduino Mega Series
• Size: 70 x 55 x 30 mm

 This package includes:

• 1 x DFRduino UNO R3
• 1 x Ethernet Shield for Arduino - W5200
• 1 x Free USB Cable? A-B For Arduino
• 1 x Free CAT5 Ethernet?Cable (Metal Connector)

 Download:1. DFRduino UNO R3

• ATmega328P datasheet: Link
• Arduino Homepage: Link
• Getting started with Arduino: Link
• Arduino Programming Reference: Link

 2. Ethernet Shield for Arduino - W5200 (w/o POE)

• W5200 DataSheet: Link
• Arduino W5200 Ethernet Library & Example: Link
• Product Wiki: Link

 Tutorial:

1. Plug [Ethernet Shield For Arudino-W5200] on the [DFRduino UNO R3].
2. Connect RJ45 cable to the Ethernet board.
3. Supply power to DFRduino UNO by connecting USB cable or external power adapter.
4. Download and install W5200 Arduino library from this link if it is not yet installed. To install W5200 library and example, find the Arduino library folder "(Arduino sketchbook folder)libraries". Place the downloaded W5200 library and unzip it to this folder.(Please note that this W5200 Ethernet Shield is can't be used directly with the original Ethernet example from Arduino because it only support for W5100.)
5. Execute Arduino IDE.
6. Select the an example sketch, e.g. "W5200_WebServer" from [Sketchbook] > [libraries] > [Ethernet_W5200] > [W5200_WebServer]
7. Change the IP address which you need.
8. Upload the sketch to UNO board.
9. Open your browser,and input your advice IP address. It works successfully when user can see 6 analog input data are displayed on browser