WizNet W5500 Ethernet SPI Adapter

    The W5500 Ethernet to SPI Adapter is based on W5500 IC from WizNet. Compared to the ENC28J20 the W5500 has an integrated TCP / UDP Stack.
    482 views
    0 comments
    likes
    introduction
    The W5500 Ethernet to SPI Adapter is based on W5500 IC from WizNet.Compared to the ENC28J20 the W5500 has an integrated TCP / UDP Stack.The W5500 supports 
    • 10BaseT
    • 100BaseTX
     Data Transfer.
    features
    • Supports Hardwired TCP/IP
    • supported Protocols : TCP, UDP, ICMP, IPv4, ARP IGMP PPPoE
    • Supports 8 independent sockets simultaneously
    • Supports Power down mode
    • Supports Wake on LAN over UDP
    • Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
    • Internal 32Kbytes Memory for TX/RX Buffers
    • 10BaseT/100BaseTX Ethernet PHY embedded
    • Supports Auto Negotiation (Full and half duplex, 10 and 100-based)
    • RJ45 Connector
    • 10 Pin Header
    how to use

    s-l1600 (2).jpg s-l1600.jpg arduino-data-logging-webserver-1024x680

    COMMENTS

    Please Login to comment
      Subscribe  
    Notify of
    POSTED BY
    tonywang_
    SELLER
    androegg Link https://www.androegg.de/?s=w5500 https://www.androegg.de/?s=w5500 Location Holzkirchen, Germany E-mailinfo@androegg.com Contact number080246467106