SainSmart WiFi Shield For Arduino Mega Uno Duemilanove(802.11 b/g/n) UART TTL Communicate

SainSmart WiFi Shield For Arduino Mega Uno Duemilanove(802.11 b/g/n) UART TTL Communicate
introduction

SainSmart WiFi Shield For Arduino Mega Uno Duemilanove(802.11 b/g/n) UART TTL Communicate

features
  •     Bring WiFi connectivity via Serial Host Interface, compatiable with Arduino
  •     Quick Booting Time : under 20msec
  •     Ultra Low Power through Dynamic Power Management (34µA at the Standby mode)
  •     Operates with standard 802.11b/g/n access point at speed up to 11Mbps (802.11b)
  •     Security Protocol : WEP, WPA/WPA2-PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
  •     Operation Temperature : -40? ~ 85?
  •     Compact Size : 32 x 23.5 x 2.9 (mm)
  •     CE, FCC, KCC Certified
  •     Supports the module with chip antenna
  •     802.11b/g/n
technical details
SpecificationsDescription
Radio ProtocolIEEE 802.11b/g/n Compatible
Supported Data Rates11, 5.5, 2, 1 Mbps (IEEE 802.11b)
ModulationDSSS and CCK
RF Operating Frequency2.4 - 2.497 GHz
Antenna OptionsChip antenna and U.FL connector for external antenna
Networking ProtocolsUDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(**)
Power Consumption(Typical)Standby = 34.0 μAReceive = 125.0 mATransmit = 135.0 mA
RF Output Power (Typical)8dBm ± 1dBm
Security ProtocolsWEP, WPA/WPA2?PSK, Enterprise (EAP-FAST, EAP-TLS, EAP-TTLS, PEAP)(**)
I/O InterfaceUART, SPI(**), I2C(*), WAKE, ALARM, GPIOs
Power Source3.3V
Dimensions32 x 23.5 x 3 mm
how to use

aaa.PNG

COMMENTS

Please Login to comment
  Subscribe  
Notify of