introduction
W5500 Ethernet module The W5500 intranet module is used to connect to the Internet via LAN cable. It can be used with all microcontrollers with SPI. The chip has 32 kB internal RAM, so there will be no hang problems during use Supports connection via TCP and UDP protocol, can be used with any Arduino board, library ready to use.
technical details
- It is a module that allows Arduino boards and microcontrollers to be connected to the internet via Ethernet cable.
- Use the main IC number W5500 with 32 kB internal RAM, allowing to receive and transmit large amounts of data at high speed.
- Connect to the microcontroller via SPI at mode 0 or 3, the maximum clock is 80 MHz.
- Supports TCP and UDP protocols and supports HTTP protocol DHCP SMTP NTP CoAP and other protocols based on TCP / UDP.
- Use 3.3V working voltage (5V I / O compatible)
how to use
COMMENTS