iNode LAN – Bluetooth gateway

• Bluetooth and ethernet: BLE - configurable via browser
  • work mode BLE: AUTO SCAN or REPEATER
  • power: -18 dBm to 8 dBm
  • network settings: IP address (permanent or via DHCP), netmask, gateway, DNS server, NTP time server
  • the name of the device in the LAN network and BLE
  • IP address and port to which the UDP packets are sent
  • sending method: multicast, or unicast stream is configurated automatically based on your IP address
  • the user's password
  • the administrator password

• Power: microUSB 5V / 85mA or POE from 6V to 30V / 40 mA, 100 Mbit/s 24V/60 mA, 100 Mbit/s, 12/120mA, 100 Mbps 6V
• Remote control via TCP / IP telnet on port 5500
• The possibility of replacing the software - through a browser
• Two LEDs: ethernet LINK and STATUS
• HTTP server:
  • 6,9 MB for user's HTTP website and 1MB for HTTP system website
  • WebSocket technology support
  • supports up to 2 calls simultaneously
• Reset button: reset settings to factory default
• Temperature sensor with a resolution of 1°C
• Working temperature: from -20°C to 45°C
• Humidity: 35% to 80% RGH
• Chipset: CSR 101x and W5500
• Built-in app JavaScript / WebSocket / HTML5 - iNode Monitor
• Body: metal
• Dimensions: 81 x 38 x 22mm
• Weight: 45g

Application

• Product tracking
• Data collection
• Air conditioning and ventilation (HVAC)
• Industry
• Home automation
• Alarm systems and protection of property

Connection

• The power supply can be connected in two ways:
  • through a microUSB connector (5V) using a microUSB cable and a power adapter with USB connector
  • via RJ45 Ethernet cable with a PoE adapter and power supply
• The device must be connected to an Ethernet LAN using a Patchcord cable
• In Windows system under “Network Neighborhood” the iNode LAN device will appear – just double click on the icon to log in through the browser settings
• Detailed instructions for configurating and managing iNode devices are available in the user’s manual.

iNode Setup and iNode Monitor browser applications enable remote access to iNode sensors. Using HTML page you can listen to and view the contents of BLE transmission packets. The HTML and JavaScript pages can be easily modified. In the same way you can control the device through telnet TCP/IP.