introduction
The LiveHouse Mysensors Ethernet Gateway is a ready to run gateway for use with MySensors.org open source hardware projects.Based on Arduino UNO with an amplified nRF24L01+ radio and WizNet 5100 Ethernet, pre-assembled, pre-tested and pre-loaded with a Gateway Sketch.Enclosed in an Aluminium case to shield from RF interference, this provides a quick, reliable solution to interfacing with your home automation controller letting you spend your time on building sensors and IoT devices.In the Box:
- LiveHouse Ethernet Gateway with external RF Antenna
- 12V DC Adaptor
technical details
Technical Specifications |
RF Protocol | nRF24L01+ with MySensors v2.x |
RF Frequency | Worldwide 2.4GHz ISM Band |
Application | Indoor use only, for outdoor use watertight plastic box |
Power | 12V DC Power Adaptor |
Operation Range | Up to 30m without obstacles |
Enclosure | Aluminium |
Operating Voltage | 220 - 250 VAC |
Operating Temp. | -0C ~ +40C |
Dimensions | 100mm x 97mm x 40mm |
- Ago Control
- Calaos
- Domoticz
- DomotiGa
- FHEM
- Freedomotic
- Home Assistant
- HomeGenie
- Homeseer
- Homey
- HoMIDoM
- Indigo Domotics
- ioBroker
- Jeedom
- MajorDoMo
- Misterhouse
- MyController.org
- MyNodes.NET
- OpenHAB
- openLuup
- PiDome
- pimatic
- Vera
- XTension
how to use
COMMENTS