DSK-INET Daughter Card

    High performance TCP/IP interface adaptor, add TCP/IP Ethernet connectivity to your DSK based projects.
    362 views
    0 comments
    likes
    introduction
    The DSK-INET daughter card from Bitec brings high performance, simple internet connectivity to DSK based projects. Based on the latest Wiznet W5300 embedded internet controller, the DSK-INET removes the need for a software TCP/IP stack running in the DSP. An API based on standard Berkley Sockets functions using a minimal set of instructions integrate the W5300 seamlessly into the DSP/BIOS kernel with minimal processor intervention. Alternatively, the DSKINET will also support raw Ethernet packets allowing TCP/IP stack and protocol development.
    features
    • Supports hardwired TCP/IP protocols : TCP,UDP, ICMP, IPv4, ARP, IGMPv2, PPPoE, Ethernet
    • Supports 8 independent SOCKETs simultaneously
    • High network performance : Max 80Mbps
    • Supports hybrid TCP/IP stack (software and hardware TCP/IP stack)
    • IP Fragmentation is not supported
    • Internal 128Kbytes memory for data communication(Internal TX/RX memory)
    • Supports auto negotiation (Full-duplex and half duplex)
    • Supports auto MDI/MDIX(Crossover)
    • Supports 16/8 bit data bus width
    • Supports 2 host interface mode(Direct address mode & Indirect address mode)
    • Stackable (co-exists with other daughter cards)
    • User selectable memory/Interrupt mapping
    how to use

    dsk_inet-510x316 (1).jpg

    COMMENTS

    Please Login to comment
      Subscribe  
    Notify of
    POSTED BY
    chen
    SELLER
    Bitec Link https://bitec-dsp.com/product/dsk-inet-daughter-card/ https://bitec-dsp.com/product/dsk-inet-daughter-card/ Location URB. LOS Angeles C/ Guadaiza 25 Edificio Diz, Planta 1 San Pedro Alcantara 29670, Spain E-mailsupport@bitec-dsp.com Contact number +34 91 632 6966
    TAGS
    DSP W5300