To have my own weather station, which transmits readings from sensors to a national monitoring map (searched in Google in 5 seconds). It turned out to be not as difficult as it seems. Consider what has been done.
For this action, I took myself an Arduino Uno and Ethernet Shield w5100 for it. All of this was ordered from China on Aliexpress.
I also ordered sensors for myself there: DHT22, DHT11, DS18B20, BMP280 (there are also gas and smoke sensors in the plans …)
Having smoked forums, google, yandex, I found a good version of the sketch – https://student-proger.ru/2014/11/meteostanciya-2-1/
In the same place, in the comments, a person laid out a completed sketch with light and gas sensors. I took them as a basis.
In those sketches there was no support for the 280th pressure sensor, we talked to the author, he replaced 180 with 280. Everything worked fine (thanks a lot for that)
Below is an example of the final sketch that I got.
At the moment I have sensors connected:
DHT22 – 1pc.
DHT11 – 1pc.
BMP280 – 1pc.
DS18B20 – 2 pcs.
An approximate connection diagram (the picture is taken on the Internet from this sketch):
Download sketch (authorship and links in the sketch remained unchanged)
For technical reasons, I am unable to upload the sketch directly here. I put it in the archive. Link to it in the line above.
As you can see, there are readings, they are running properly, for example, I will post a couple of screenshots from my sensors:
COMMENTS