introduction
REX / ETGO is a converter that converts RS-232C signals to the TCP / IP protocol. Equipped with an RS-232C interface, it can be connected to a serial communication device and placed on a network for data communication. It is also possible to communicate RS-232C machines with each other without going through a PC by communicating this product in the opposite direction.
features
| name | Ethernet to RS-232C Converter | |
| Model Number | REX-ET60 | |
| interface | RS-232C | EIA/TIA-232-F Standards compliant |
| Ethernet | IEEE802.3 (10Base-T), IEEE802.3u (100Base-TX)half-double / full-double (automatic determination) | |
| RS-232C Transceiver | EXAR SP3232EBE | |
| Ethernet connector | RJ-45 ×1 | |
| RS-232C Connection Connector | D-Sub9Pin (Male) × 1 | |
| Communication protocols | TCP/IP/MAC/DHCP | |
| RS-232C I/O Level | driver | High-level output: +5V (min) / +5.4V (TYP)Low-level output: -5V (min) / -5.4V (TYP) |
| receiver | Input voltage range: -15V (min.) to +15V (max.) | |
| RS-232C Communication System | asynchronous communication | |
technical details
| RS-232C Speed | 1200/2400/4800/9600/19200/38400/57600/115200 bps | |
| Transmission distance | RS-232C / 15m | |
| External dimensions | Approx. 86.2mm (L) ×89.5 (W) ×24.0(T) [mm] (excluding protrusions) | |
| weight | Weight Approx. 205g (body only) | |
| Power supply voltage | DC+5V | |
| Current consumption | 200mA or less (when sending and receiving: not including external power supply) | |
| Operating environment | Temperature: 0 to 55°C Humidity:20 to 80% (but not condensation) | |
how to use
COMMENTS