introduction
The FP-NKS-01-A is a QSH industrial carrier card based on the Xilinx Virtex-4 SX55 FPGA family and supports 32-bit or 64-bit PCI bus data paths, Ethernet10/100 and USB 2.0. This board also provides a developed platform for designing and verifying Virtex-4 FPGA based PCI and Stand-Alone applications. It is optimized version to operate at higher frequencies (500 Hz<). Communication with a host computer via the PCI bus and other interfaces enables users to control the card, modify algorithm settings and process real-time signals. Additionally, this card can transfer high bandwidth data through QSH/QTH standard modules.
features
Features
• VIirtex XC4VSX55/XC4VLX100/XC4VLX160-FF1148 Xilinx Device
• 64-bit 66MHz/32-bit 33MHz PCI Add-in Card Connector
• Enhanced 10/100 Ethernet Full Stack Interface with RJ-45 Connector
• QSH Connector for ADC/DAC QTH Modules Connect to FPGA
• Spartan XC3S50AN for PCI-based and User I/O
• Device Configuration Through On-board Platform Flash (32Mb), or Download Using Xilinx Platform Cable USB (JTAG Programming Interface)
• 1 Gb SDRAM Component Memory (up to 167MHZ)
• User Push-button, Switches, LEDs and GPIO Header
• JTAG and Trace Debug Ports (ChipScope Support)
• Enhanced High Speed USB 2.0 Interface
• PCI Clocking Support for Global and Regional Clocking Applications
• Four On-board Clock Sources
• SPI EEPROM (4Mb)
• 5.0V PCI & External Voltage Supply
• Physical Dimensions (L: 236.7 mm, W: 120.1 mm)
• Industrial Temperature Range (-40°C to 85°C)
• Operation System Support: Windows & Linux
technical details
Block Diagram Application
- RADAR- High Bandwidth Data Transfer- Parallel Processing Application- Communications- Complex DSP Applications- Fire Control and Defense Systems
how to use
COMMENTS