introduction
W5100SEVB KEY FEATURES
- W5100S chip evaluation board based on the 32-bit ARM Cortex-M3
- Hardware pins are compatible with Arduino Uno Rev.3
- SUPPORTS 2 PUSHBUTTON SWITCHES (SW), 1 RGB LED
- Supported 1-port Ethernet connector/USB-micro Type B connector
- SUPPORTED ISP AND SWD INTERFACES
- VARIOUS APPLICATION CODES ARE AVAILABLE - LOOPBACK, DHCP, DNS.
- MCU: STM32F103VCT6 Cortex-M3 (up to 72MHz, 256 or 512KB flash memory, 64KB SRAM)
- Ethernet: W5100S (WIZnet Hardwired TCP/IP)
- POWER SUPPLY: 5V DC POWER SUPPLY
- EXTENDED I/O: 80 GPIOS (INCLUDING ANALOG EXTERNAL DEVICES USING 12-BIT ADCS)
- RJ-45: Single Channel 10/100 Base-TX RJ-45 with Channel (57-00013QL11-1/UDE)
- USB: USB Micro-B type (on-board USB to UART IC, USB BUS power supply/CP2104) - for debugging
- Onboard user I/F: 2xPush pushbutton switch, 1xRGB LED
- dimensions (mm): 90 (l) x 80 (w) x 11 (h)
how to use
COMMENTS