introduction
It was revised from the "LAN Module with W5500" to "V12".
Description
LAN Base is an Ethernet controller base, built-in W5500 full hardware TCP/IP embedded Ethernet controller (SPI communication interface), supports multiple communication protocols (TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE, etc.) and integrated storage buffer area to facilitate Ethernet data packet processing. The internal reserved expansion pad can be used to expand the RS485/RS232 communication switch module or add custom designs, standard fixed rails, etc. Accessories, LAN Base with both performance and expansion flexibility can provide you with a more concise embedded Ethernet connection.features
Product Features
- It can meet the wired network access requirements in the actual production environment.
- Designed for industrial application scenarios:
- Provide metal slide rails for easy installation and fixation
- Equipped with HT3.96 terminals for electrical connection
- Support input power voltage: 9-24V
- Standard configuration TTL-RS485 + TTL-RS232 two adapter boards, adapt to different communication interfaces.
technical details
Include
- 1x LAN Base
- 1x TTL-RS485 adapter board
- 1x TTL-RS232 adapter board
- 1x header 20pin
- 1x metal rail and disk
- 3x HT3.96 terminal
- 2x 3pin
- 1x 4pin
- 10x cold crimp terminals
- 3x Allen key
- 1x 1.5mm
- 1x 2mm
- 1x 2.5mm
- 2x socket head screw M3x28
- 4x hex socket tapping screws KA2x4
- 1x countersunk screw M3x8
how to use
COMMENTS