introduction
Description
- ✔️ BUILD A NETWORK DEVICE: Arduino Mega 2560 with Ethernet W5500 on board. It Comes with LAN and Wi-Fi connection. The best premium alternative for Arduino Mega 2560 and Ethernet Shield! ✔️ ARDUINO MEGA 2560 R3 FORM-FACTOR: Programming in Arduino IDE: RobotDyn MEGA 2560 ETH R3 can be programmed via an Arduino IDE. Select Arduino Mega 2560 in the «Boards» menu, and use Ethernet3 / Ethernet4 library. ✔️ PORTS AND INTERFACES: RobotDyn MEGA 2560 ETH R3 has 70 input/output ports, 12 of which can be used for PWM, and 16 analog ports with 10-bits resolution (0 — 1023). The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. ✔️ ETHERNET W5500 on board: W5500 is a TCP/IP embedded LAN Ethernet controller.It provides TCP/IP Stack,10BaseT/100BaseTX Ethernet with full or half-duplex, MAC and PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega2560.For lower energy consumption,W5500 provides WOL (Wake on LAN) and Power Off modes.ESP-01 Wi-Fi On board have socket for connecting Wi-Fi ESP-01 module.Wi-Fi module connecting to Serial3 interface via RX3(D15)/TX3(D14) ✔️ MICRO SD CARD READER/WRITER: The Ethernet shield w5500 board also features a Micro SD card socket. The micro SD card can be used to save and store the data, which can later be transferred over the network. The Ethernet controller and microSD card are connected through the SPI bus..
- Imported from USA.
how to use
COMMENTS