
details
Key Features
Connectivity
- Dual-band (2.4GHz and 5GHz) 802.11abgn WiFi
- Isolated LAN Ethernet via second RJ45 connector
- RS-485 port
Expansion
- Three Grove System Connectors for I²C and analog/digital devices
- USB 2.0 Low-Speed/Full-Speed host with stack in impOS™
Analog-to-Digital Conversion
- ADC using the MCP3208 connected via SPI
Electric Imp Module
- imp005 (Murata Type 1GC)
Application Feedback
- User-controllable red, yellow and green front-panel LEDs controlled via imp005 GPIO pins
Power Source Options
- 5VDC via mini USB connector (power only; no data)
- 8-28V AC/DC
External Features
Frontplane
Backplane
Isolated LAN Ethernet Port
The IoT Discovery Gateway has a downstream port intended to provide access to Ethernet-equipped industrial equipment such as Programmable Logic Controllers (PLCs). The downstream port is implemented using a Wiznet W5500 SPI-to-Ethernet bridge and uses the W5500’s integrated PHY.
The W5500 is accessed using the imp005’s hardware.spi0 peripheral and the active-low chip select (nCS) pin dedicated to hardware.spi0. The W5500 interrupt and reset pins are connected to imp005 GPIO for additional control. SPI communications are limited to 8MHz.
COMMENTS