introduction
This module adds wired Ethernet communication to the WisBlock interfaces. It supports 10BaseT and 100BaseT Ethernet transfer speeds. Optional (coming in 2022 Autumn Launc Event) it supports PoE (Power over Ethernet) to supply the WisBlock modules.
features
- Based on WIZnet W5100S-L chip
- Support Hardwired Internet protocols
- Support four independent SOCKETs simultaneously
- Support SOCKET-less command
- Support Ethernet Power-down mode & Main Clock gating for power save
- Support WOL (Wake on LAN) over UDP
- SPI Host Interface
- Internal 16Kbytes Memory for TX/RX Buffers
- 10BaseT/100BaseTX Ethernet PHY Integrated
- Support Auto-Negotiation
- Support Auto-MDIX only when Auto-Negotiation mode
- Network Indicator LEDs
- Supply Voltage: 2.97 V ~ 3.63 V
- Size: 25 x 50 mm
how to use
To use a RAK13800, you need to connect the module to the IO slot of a WisBlock Base Board. The WisBlock Base is the power supply for the RAK13800 module. Furthermore, you need a WisBlock Core module, to control the module via software code.
documents
COMMENTS