introduction
Shield for Arduino board made by DFRobot company. It extends Arduino capabilities by adding Ethernet communication and PoE module. It allows users to connect the Arduino to a network using an RJ45 cable. The module is based on the W550 chip, which provides a wired TCP / IP connection. The W5500 has a built-in 32-kilobyte internal memory buffer for processing Ethernet packets.
features
- TCP / IP protocol support: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
- WOL Wake-on-LAN support
- Ethernet Controller: W5500 with 32 kB buffer
- Built-in level converter circuit
- PoE module allows power over Ethernet - works only with PoE capable routers / switches
- Suggested application:
- security system: network camera
- home monitoring
- USB Ethernet: storage devices, network printers
- set-top box, PVR, digital media centre
technical details
- Type: Arduino expansion board
- Type: communication overlay
- Communication type: Ethernet and PoE
- PoE input: 48 V AC/DC
- PoE power: up to 12 W (VIN port can output 12 V / 1 A)
- PoE class: 0 PD
- PoE standard: 802.3at
- Communication interface: SPI bus
- SPI Clock: 80 MHz maximum
- Ethernet controller: W5500 with 32 kB buffer
- Supported TCP / IP protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
- Built-in RJ45 connector
- Slot for microSD memory card
- Overlay dimensions:
- boards: 68.6 x 53.3 mm
- boards and Ethernet connectors: 72.5 x 53.3 mm
how to use
documents
COMMENTS