IAMS21X _

Introduction Iono Uno combines the ease of use of the Arduino platform with multiple input and output interfaces; the result is a rugged, safe, reliable and easy to connect module, suited for installation both in industrial and residential environments. Iono Uno is compatible with all Arduino boards compliant with the Arduino 1.0 pinout and form-factor, like Arduino Uno, Arduino Leonardo, Arduino Uno WiFi, Arduino Yún, and many other.

Features The Iono Uno modules key features are: ✓ 12÷24Vdc power supply ✓ compatible with 5.0V and 3.3V operating voltage Arduino boards with 1.0 pinout ✓ 4 multi-mode inputs: either to be used as digital or as 0÷10V or 0÷20mA analog signals ✓ 2 digital inputs for potential-free contacts ✓ 1 analog output 0÷10V controlled by PWM signal ✓ redundancy of common terminals for simplified wiring ✓ 6 power relay outputs rated for 12A at 250V, which can tolerate large peak currents (inrush current) up to 80A ✓ output relays with bistable coil, to minimize the current consumption ✓ standard RS-485 interfaces to the Arduino serial pins with automatic TX/RX switching, and electrostatic discharge protection ✓ built-in slot for the installation of an Arduino Uno, Arduino Uno WiFi Rev 2, Arduino Ethernet, Arduino Leonardo, Arduino Leonardo Ethernet, Arduino Yún Rev 2, or Arduino Zero board ✓ removable terminal blocks for easier installation ✓ inputs protected against electrostatic discharges and temporary over voltages ✓ double internal insulation between high voltage areas (relay outputs) and all other components ✓ standard modular housing 9 units size, suitable for mounting on Omega rail. User Guide : https://www.sferalabs.cc/files/ionoard/doc/ionoard-user-guide.pdfSchematic : https://www.sferalabs.cc/files/ionoard/doc/ionoard-sch.pdfCE/RoHS Compliance : https://www.sferalabs.cc/files/ionoard/doc/ionoard-cert-ce.pdfQuick Reference : https://www.sferalabs.cc/files/ionoard/doc/ionoard-quick-reference.pdfLibraries and examples : https://github.com/sfera-labs/iono/