Board
The board Nano V3 Ethernet Shield W5500 is designed to work in conjunction with the controller RobotDyn Nano V3 and allows you to add Ethernet networking support to your projects. A feature of this solution is its miniature size and the ability to add network support to your project easily - just connect a controller board and a network shield as a “sandwich” - and your server is ready! All that remains is to download the appropriate firmware, and you will be able to manage and exchange data with both your server and computers on the local network and the Internet.
WIZnet W5500 Chip
Fast network chip WIZnet W5500 supports up to 8 simultaneous sockets and has a hardware implementation of the network stack that allows you to create robust and reliable network applications: various servers, network clients, etc., and also allows you to work with most modern, relevant network protocols.W5500 Specifications
| Parameter | Value |
|---|---|
| Microcontroller | WIZnet W5500 |
| PHY compliance | 10BaseT/100BaseTX Ethernet. Full and half duplex |
| Operating Voltage | 3.3 V |
| Memory | 32 Kbytes memory for TX/RX buffers |
| TCP/IP Protocols | TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE |
| PHY Clock Speed | 25 MHz |
PoE Support
For those cases where power supply to your controller is difficult or impossible, the board Nano V3 Ethernet Shield W5500 supports power supply according to PoE standard. A small adapter that plugs into a dedicated connector on the side of the Ethernet Shield board provides support for this.There are boards Nano V3 Ethernet Shield W5500 both with and without PoE module - you can choose the option that is best suited for the implementation of your project.
Distinctive features
5 reasons why you should pay attention to the board Nano V3 Ethernet Shield W5500 and use it in your projects:
1 Unique design This is the original RobotDyn development, which has no analogs both in concept and in technical capabilities.
2 Miniature dimensions Ethernet Shield is specially designed to work with a miniature board RobotDyn Nano V3 and allows you to build a fast and functional server for your projects in one go.
3 Powerful W5500 chip The shield is based on the powerful and productive WIZnet W5500 network interface chip, which has 8 sockets and implements a network stack in hardware.
4 PoE support This board, using a special adapter, supports the PoE standard for receiving power via a network cable and allows you to create projects without using power supplies or batteries.
5 Professional solution RobotDyn engineers created this board for advanced DIY enthusiasts and professional developers – it supports unique settings, for example, it allows you to control the reset of the W5500 chip and use its interrupts (IRQ).
COMMENTS