introduction
features
Key features:
- The evaluation board based on the Samsung ARM (S3C2410) is the W5300 chip
- Test high-speed network performance (data transfer speeds over 50Mbps)
- Runs on OS Linux (kernel 2.6.24)
- 64M SDRAM is used to operate various applications
- Microcontroller: 200MHz Samsung S3C2410A ARM RISC processor
- RAM：SDRAM 64MB
- ROM: NAND flash 64MB
- Serial port: RS-232C 1 port
- USB: USB host 1 port
- Ethernet: WIZ830MJ (W5500 + RJ-45, BS-RB10005)
- LCD: 16 characters x 2 lines of character LCD port (C-LCD option)
- Buttons: 2 Tack switches for debugging
- JTAG: On-board JTAG connector
- Module connector: 56-pin (28-pin x 2), 2.54mm pitch pin socket
- Expansion port: 120-pin (40-pin x 3) 2.54mm pitch pin header port
- Power supply: DC 5V, adapter
- PCB size (mm): 118 x 97
Specifications:
| System information | |
| Communication methods | 8/16-bit bus |
| Time rate | Up to 80Mbps |
| Kernel | Full hardware TCP/IP core, PHY, MAC |
| Number of Sockeys | 8 |
| Operating temperature | -40~80℃ |
| Ethernet | |
| cache | 128Kbyte transceiver cache |
| Support protocols | TCP、UDP、ICMP、IPv4、ARP、IGMP、PPPoE |
| Microcontroller | |
| RAM | SDRAM 64MB |
| ROM | NAND flash memory 64MB |
| Serial port | RS-232C port 1 |
| USB | USB host 1 port |
| Ethernet | WIZ830MJ（W5500 + RJ-45，BS-RB10005） |
| LCD | 16 characters x 2 lines of character LCD port (C-LCD option ). |
| button | 2Tack switch for debugging |
| JTAG | On-board JTAG connector |
| Module connectors | 56-pin (28-pin x 2), 2.54mm pitch pin socket |
| Expansion port | 120-pin (40-pin x 3) 2.54mm pitch pin header port |
| Power supply | DC 5V, adapter |
| PCB size (mm ). | 118 x 97 |
technical details
Block diagram
how to use
COMMENTS