Connect your device to an Ethernet network

    Sometimes there is a need to connect a device to an Ethernet network. To solve this problem, there are a huge number of different network controllers, transceivers. You can very conditionally classify the way a device connects to an Ethernet network.
    204 views
    0 comments
    0 likes
    ORIGINAL POST
    By Donets Anton
    details

    2022-08-26-1.jpg

    Why the WIZNET W5300 chip?

    It has:
    a) a hardware-implemented TCP/IP protocol stack,
    b) a parallel 8/16-bit data bus for exchanging information with the control processor (UP),
    c) the maximum data exchange rate is almost 50 Mbps. g)
    a built-in PHY transceiver (physical layer transceiver),
    e) the internal memory of the transceiver 128 KB.

    2022-08-26-1.jpg

    Why the WIZNET W5300 chip?

    It has:
    a) a hardware-implemented TCP/IP protocol stack,
    b) a parallel 8/16-bit data bus for exchanging information with the control processor (UP),
    c) the maximum data exchange rate is almost 50 Mbps. g)
    a built-in PHY transceiver (physical layer transceiver),
    e) the internal memory of the transceiver 128 KB.

    COMMENTS

    Please Login to comment
      Subscribe  
    Notify of
    POSTED BY
    ssekim
    TAGS
    W5300